[. . . ] Pack contents: 1) 4 x self-tapping screws (60mm) 2) 4 x wall anchors (8mm) 3) 6 x M4 x bolts (12mm) 4) 4 x M4 x bolts (30mm) 5) 4 x spacers PLEASE NOTE: Study the following instructions and assembly diagrams with care prior to installing and using the mount. [. . . ] The self-tapping screws provided may be used without the wall anchors when mounted on wood. We recommend you use a qualified installer to mount the product on walls made of other material. The product is not suitable for use outdoors B) Place the mount basis on the wall in the desired position keeping the overture in the upper position (see fig. STEP 2 ­ Plate mounting on the LCD rear panel Important: NEVER mount the product with the LCD monitor plugged in and/or with the screen faced downwards to avoid damaging the screen surface. Examine the rear of the LCD monitor: - if the surface is flat, mount the plate using the 12mm bolts (3) ; - otherwise use the larger bolts (30mm) (4) and spacers (5) (fig. STEP 3 ­ Final mounting To complete installation: - Insert the plate (with the LCD/Plasma screen mounted on it) into the guidelines of the basis (already fixed on the wall) moving it carefully downwards ; - when the plate completely reached the end-stroke, insert the two security screws and tighten them screwing clockwise Note: to remove the plate, just unscrew the two security screws anticlockwise and slip off the Lcd/Plasma screen moving it carefully upwards. Manufacturer by this warranty engage itself to only replace this product in case of workmanship defects causing limitation to the use of the product as described. This warranty does not cover direct or indirect incidents, and damages resulting from the use of this product, accidents, tampering, inability to follow the instructions, mishandling, neglect and any other use. [. . . ] This limited warranty only extends to the first original purchaser for 5 years . [. . . ]